✨Small Theatre !✨

✨Custom bionicle (again) !✨

Two more from my Ru-Fahi series !

Details and rambling below !

Jaller Ru-Fahi

…Because I couldn’t not include him. Realistically, all Toa Mahri a good to some extent, but this is peak Toa material right here. One of the first I acquired, one of the best looking ones, too. The base body is practically the same as the original, with some twists, but I mostly made him thicker and upgraded his sword, which is better with a guard and a proper handle. Well, that, and the Hannah, obviously. Sure, the original one was cute, but here me out :

Look at it, and behold ! It might be slightly bigger than the original, have only four legs, and need a larger chain (which I found just earlier in a box of misc Hero Factory pieces, and is better than a basic Lego chain), but doesn’t it look very cute and wholesome and dangerous ? Also, I gave it actual joints, because it deserves it, and removed the Kordak blaster because it didn’t need it anymore. I really love making arthropods with bionicle (I have more for later~).

Pohatu Ru-Fahi

Definitely looks awesome. The original is Pohatu Phantoka from the Rockoh T3 set (because I have one and a half of this set). It is the coolest version of Pohatu (because orange>brown, obviously). Lot of modifications on that one, from the custom jet pack to the arms and the legs. The arc pieces for the front arms are more or less of placeholders because I was niece a good piece to make the arms larger, but it turned out alright. The blades are also stolen from the half Rockoh, and the piece underneath, if anyone recognises it, is from Pohatu Nuva, because it’s a neat reference. And the tube is somehow remaining in the Kanohi, despot the fact that there is not any proper connection for it tand hold onto.

Also, can we talk about this leg ? If you ignore how incredibly illegal this whole piece is (ball joint stuck by the light grey part and small black and grey piece not completely connected to the rest), I think that’s the best shape I managed to get so far, and it reflects nicely what I have envisioned (Pohatu being able to run/jump easily because of the shape). And, it had the added advantage of fitting perfectly with the orange piece above when the knee bends.

Last but not least, I also have started a potential candidate for Toa of air, despite a lack of proper Kanohi, even with my extensive collection. My first candidate would have been Lewa Phantoka from the Axalara T9, but this one has a special place in my heart, so won’t be touching it and it will proudly remain in his shelf (along with the untouched Pohatu). So, maybe another of this series soon ! But probably not. And if I miss posting custom bionicle too much, I have a (complete) collection of entirely custom Toa, but I’m afraid they won’t fit in my studio (they’re big, too big).

✨Mimic !✨

You opened the wrong chest this time !

This little build is a perfect decoration and was quite fun to build.

✨Custom air Toa !✨

6/6, that’s the last one ! And the biggest one, too-

Closeups under the cut !

Front/back views

As you might notice, it is tall. And it has more than four limbs, which would not be a problem if it was the only one. But. It appears that all my green mocs end up with too much limbs, and I can’t fathom why. Really, another prototype standing on my desk also has for and so does the green hero factory one…You get the idea.

Anyway, the colour scheme for this one is dark green and silver, with some translucent bright green accents. Using only bright green would have brought too much contrast with the others Toas (notably the dark red one), but I had these cool pieces to use and no one else to put them onto. And since these are experimental…

The two supplementary limbs are intended as movement claws, given that we usually see air Toas moving in jungles (Lewa mostly, that is). The silver pieces at the front and back ends are respectively Kopaka’s skis and Pohatu’s foot pieces (shoes ?). The largest bits are made out of technic pieces directly, to give some simple angles.

Bust views

I find this silver/green chest piece really cool, it’s a shame I don’t have much of them. The two bright pieces on either sides are Vahki head pieces, and since their only connectors are on their relative tops (side of the piece in their actual orientation), you may remark that they are connected to nothing. I’m having the arm socket go through them, and the rest of the body’s shape avoid too many movements. While nice, this also limits the movement range of the arms, but it works well enough (these are not really made to play, anyway~). The two bright pieces with spikes are from a Ehlek. Wish I could have managed to put that one back together, but it instead served a higher purpose.

The Kanohi is Hordika Matau’s, with transparent Bohrok eyes underneath (it share this technic with my previous white Toa). The back piece is coming from a Piraka, but it’s actually a broken piece. I have quite a bunch of these, where the mask and flexible parts have broken off, so I make the most of it (like you might see in the future on another MOC). I’m using technic angle (type 3, to be precise) to keep the shape of the middle ones, but the others are free.

Finally, a (dismantled) leg view.

Finally, the leg segment !

The Toa was too big for proper leg showcase, my lights created terrible contrasts (shelf not deep enough…), so here is a stand alone leg instead.

Once again I have integrated the Metru chest piece to the leg, but as a foot this time. It offers a good stability and looks nice.

The next part doesn’t have much interesting bits, except that I’m using technic tubes to hold the additional piece, making this technic less illegal that my usual works (keyword : less; there is still a whole lot of stress on these poor pieces).

The top part is…somewhat more complicated. The frame is of technic pieces (like the additional limbs), which keeps together an immobile socket joint which keeps the double socket and two Bohrok feet (one for decoration, one connected to the hip socket). The double socket is used both to connect the two halves of the leg and to hold the small arm piece which is here only for decoration.

And that’s it for this series ! I’m hoping to bring them to next month’s exhibition, along with some Bionicle MOCs I haven’t showcased here because…shelf…Given the sheer size of my big project (posted here next week in theory), I’m gonna have to improvise something quickly, and profite of it to get some pictures of my other big ones while I’m at it. Eh, I’ll figure it out (and if I don’t, I’ll just delete that statement later :}

Thanks for reading, have a good day !

Following in my pride flag series :

✨Ace pride flag✨

(Previous work here !)

✨Custom ice Toa !✨

And another one ! If the others were already experimental, this one is much, much more-

Closeups under the cut !

Front/back views :

That one was a lot of fun ! But it’s also not really stable, considering there are some weird piece combinations. This one also has disproportionate legs, compared to the rest of the body, but it’s alright.

With that one, I really tried to remain within Kopaka’s spirit (notice the ski blades and the Kanohi). The bow and arrow (which doubles down as a lance, and is using one of Kopaka’s blades), is a weapon I don’t think has been used before in the original bionicles (correct me if I’m wrong).

The arms/hands are using Pridak’s feet, because it works well and still allows for large movements.

I used some darker white pieces on the back and shoulders to get some slight contrats, and used technic pieces on the chest to get a proper body shape, with a leg piece underneath.

Legs :

(Too) Many details on the legs ! The blades under the feet are a combination of Kopaka Nuva’s blades and Glatoran blades, which also hold a shoulder piece used as a supplementary leg pieces.

Now is the here we enter the mess : all of the ankle sockets you can see are not used for the articulations, and are only here to keep the back piece in place (Star leg), while the actual socket is behind the technic gear plate. Then there is a socket which doesn’t even have a ball, it is directly stacked on top of another socket, and I use multiple feet to cover the leg areas which would expose how terrible the inside is. At the front, you might also notice a 1*2 curved slope tile held by two technic pins. It’s floppy, and it looks weird from the side, but the front appearance makes it worth it. Finally, at the front, I also use part of a Vahki’s head as a final plate, before we finally reach the connection between the legs and the body. As I said, that whole part is a mess.

Head :

Tried to remain close to Kopaka’s appearance here too, by adding a X-ray vision thing, but the most important part is that the Kanohi is Hero Factory Stormer’s mask, but sideways. The trans blue pieces are Borhok eyes, which fit perfectly, and I managed to cram a socket connector inside, making the head quite mobile and sturdy.

Next week is another one ! Not sure which of the three it will be, but I haven’t decided which one yet (tell me if you have a preference~).

I also finally received my new parts, meaning I can get back to working on my big project, yay !

Your lego pride flags are so cool! I love them! <3

I’m very late because I didn’t see this before (I’m not sure of how, but well…), but thanks a lot ! I will definitely continue to make some of these, and I do have some potential inspiration for one very soon~

✨Aroace pride flag✨

Since I’m mostly doing these as room decoration for me, I’m slowly running out of idea, but I’m open to taking requests (potentially with instruction, if anyone is interested, simply ask me) :}

(See previous work here)

Ah, I knew a special occasion would present itself that would be worthy of this cat !

Get booped

Get booped back ! Ah !

Oh, and have an actual (Lego) cat while I’m at it !

✨Bionicle Beetle !✨

Ah, another insect ! Check the other one here.

Does it ring a bell ? The head (and some of the brown parts) come directly and with very few modifications from the Jaller & Gukko set. I never managed to get Jaller, so instead, I turned Gukko into this nice, big Rahi.

Now, of course, detail and the other pictures below the cut !

Front, hind, and neath !

I’m absolutely delighted with how it turned out. First of all, I really like the head which has been intact for as long as I can remember, although I know that I’ll never complete the set because I don’t have Jaller’s Kanohi. What I have plenty of, however, are the pearl grey Rahkshi shells, so you can see that I’ve used three of them on top. Then, I have to find pieces with a good enough curvature. So the next piece is from a Toa torso (Hordika) and the next one is used as a wing/pauldron on different sets, which has a perfect shape. On the sides, I’m using practically only pieces from a brown Vahki.

The underside is quite simple, but I wanted to make sure the colours remained coherent with the head, so I kept this bright brown while trying to make it as light as possible (the six legs are already barely letting it stand).

Under the dual Rahkshi shells, I have a bit of space which could let me add a nice feature, although I don’t know what yet. I planned on making actual elytra, but that would have been too complex, so there is currently nothing.

There isn’t much left to add, since for once, I have made simple legs (only because the body was more complicated…), but I nevertheless want to point out how well the small arm pieces I used to connect body and feet are for insect-like shapes, while keeping it quite mechanical. Just the perfect balance.

Also. Would anyone happen to know if there is a spreadsheet referencing all Bionicle (bonkle ‽-) gens with images and additional infos ? I have done a tremendous amount of research because I can’t remember any of the names properly, and having a single spreadsheet would be easier. AND, if not, would anyone be interested in access in such a spreadsheet ? Because if I do end up making one, I would be happy to share !

Have a nice day :}

A little replica of a wakeboard ski-lift I made as a present for a friend ! (Other views below)

The system is a little sturdy but it does the work, and the different white modules work as more than simply decoration !

(Sorry for the bad quality of that video-)